| Ordernumber | Product description |
| L6-ACC00-DE | LMG600 series manual in German |
| L6-ACC00-EN | LMG600 series manual in Englisch |
| L6-ACC-SYNC-2 | Sync cable for pair of two LMG600 |
| L6-ACC-SYNC-3 | Sync cable for pair of three LMG600 |
| L6-OPT-HDL2 | Handles for LMG610/640/670, 2 pcs. for front side |
| L6-OPT-HDL4 | Handles for LMG610/640/670, 4 pcs. for front and rear side |
| L6X1-OPT-HDL2 | Handles for LMG611/641/671, 2 pcs. for front side |
| L6X1-OPT-HDL4 | Handles for LMG641/671, 4 pcs. for front and rear side |
| L67-X-01 | 19 inch rack mount kit for LMG610 |
| L671-X-01 | 19 inch rack mount kit for LMG611 and LMG671 |
| L64-X-01 | 19 inch rack mount kit for LMG640 |
| L641-X-01 | 19 inch rack mount kit for LMG641 |
| L60-X-ADSE | Adapter for LMG600 series to connect sensors and current clamps |
| L6-ACC05 | Transport case for LMG67x/64x and accessories |
| L6-K-NI2415 | Interface cable for reference impedance network control via LMG600 |
| Order No. | Product Description |
| L50-Z00 | LMG500 manual, German or English |
| L50-Z01 | 19"-Mounting kit for LMG500 |
| L50-Z04 | Carrying case for LMG500 and accessories (1-4 channels) |
| L50-Z05 | Carrying case for LMG500 and accessories (5-8 channels) |
| L50-Z13 |
Cable for coupling (DSP extension modul possibly necesary, refer to L50-O10) using a LMG500 for channels 5-8 instead of the extension chassis LMG500-E |
| L50-Z14 |
Adapter for LMG500 to connect sensors and current clamps terminating with HD15-plug HD15 to 4mm measuring inputs and DSUB9 sensor identification / supply, especially for L45-Z06, -Z10, -Z16, -Z26, -Z28, -Z29 |
| L50-Z18 |
Adapter for incremental speed sensor onto LMG500 measuring channel (I-Sensor input) Pulses converted to analog voltage with +/-sign indicating sense of rotation short response time for graphical presentation to analyse extremely dynamic processes |
| L50-Z19 |
Adapter to synchronize on fundamental frequency using a xA:1A current clamp (to be ordered separately), with settable low pass Filter 200Hz - 20kHz |
| L50-Z318 |
RS232 - Ethernet - converter, 10/100Mbit external adaptor, all connectors will fixed at the LMG, power supply from LMG |
| Order No. | Product Description |
| L45-Z00 | LMG450 manual, German or English |
| L45-Z01 | 19"-Mounting kit for LMG450 |
| L45-Z02 | Carrying / tilting handle bar for LMG450 |
| L45-Z04 |
Carrying case for LMG450 and accessories Plastic foam material inside, outside material Aluminum, lockable, dimensions 25cm x 49cm x 38cm |
| L45-Z09 | Adapter BNC to HD15 for isolating current sensors with voltage output; but no EEPROM |
| L45-Z13 |
LMG450/500 master-slave cable, length 1m connection of 2 pcs. LMG450 via Sync inputs for simultaneous measuring of more than 4 phases Possible couplings: LMG450 <-> LMG450 LMG450 <-> LMG500 (1-8 phase) LMG500 (1-8 phase) <-> LMG500 (1-8 phase) |
| L45-Z18 |
Adapter for incremental speed sensor onto LMG450 measuring channel (HD15 sensor input) Pulses converted an analog voltage with +/- sign indicating sense of rotation Short response time for graphical presentation to analyse extremely dynamic processes |
| L45-Z22 |
Adapter safety plug to HD15 for isolating current sensors with current output up to 1,2Apk; EEPROM for storage of scaling |
| L45-Z318 |
RS232 - Ethernet - converter, 10/100Mbit external adaptor, all connectors will fixed at the LMG, power supply from LMG |
| SSU4 |
Supply unit for 1 to 4 pcs. PSU600 sensors and L45-Z29, for use with LMG instruments |
| LMG-Z-AMP | Artificial starpoint simulation for 3p-3w-systems |
| L5-Z03 |
Cable for coupling of process signal interfaces (analogue and digital) between two LMG450 and/or LMG95 (option L45-O3, L95-O3), exchange of measuring values for further computation with formula editor, e.g. calculation of efficiency |
| L5-IOBOX-S |
Adapter (also for DIN rail mount) from 25pol. SUB-D connector to screw cage connection for conductor cross sections up to 1,5mm x mm incl. 2m cable for connecting adapter with one processing signal interface |
| L5-IOBOX-F |
Adapter (also for DIN rail mount) from 25pol. SUB-D connector to screw cage connection for conductor cross sections up to 1,5mm x mm incl. 2m cable for connecting adapter with one processing signal interface |
| Order No. | Product Description |
| L95-Z00 | LMG95 manual, German or English |
| L95-Z01 | 19"-Mounting kit for LMG95 |
| L95-Z02 | Carrying / tilting handle bar for LMG95 |
| L95-Z03 | Safety claw grip type C, 1 set=4 pcs. 2 pcs. in red, 2 pcs. in black, 20A/1000 |
| L95-Z04 | Carrying case for LMG95/95e and accessories |
| L95-Z06 |
HF-summing current transformer with burden resistor for interference free current measurements on discharge lamps |
| L95-Z06-HV |
HF-summing current transformer with burden resistor, standard safety connectors replaced by special high voltage cable, open on both sides, due to insulation (2kV) reasons (for interference free current measurements on e.g. discharge lamps) |
| L95-Z07 |
Adapter LMG95 external shunt input for the use of hall sensors L45-Z28, -Z29 and compensated current clamp L45-Z406 HD15 female to 2x 4mm safety plug, D-SUB9 cable for supply from LMG95 aux. supply |
| L50-Z318 |
RS232 - Ethernet - converter, 10/100Mbit external adaptor, all connectors will fixed at the LMG, power supply from LMG |
